technical data sheet rpc1.85 straight jack 08K121-2W7S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 180 page p.o.box 1260 d84526 tittmoning germany fa x: +49 8684 18499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tolerances according to i so 2768 mh interface according to iec 6116932 mechanically compatible with rpc2.40 documents assembly instruction 02 a3 material and plating connector parts material plating center contact beryllium copper gold, min. 1.27 m , over chemical nickel outer contact stainless steel passivated dielectric peek solder sleeve brass gold, 0.1 m min.
technical data sheet rpc1.85 straight jack 08K121-2W7S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 180 page p.o.box 1260 d84526 tittmoning germany fa x: +49 8684 18499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 w frequency dc to 70 ghz return loss 3 20 db, dc to 70 ghz insertion loss 0.05 x db insulation resistance 3 5 g w center contact resistance 4.0 m w outer contact resistance 2.5 m w test voltage 500 v rms working voltage 150 v rms rfleakage 3 100 db up to 1 ghz limitations are possible due to the used cable t ype mechanical data mating cycles 3 500 center contact captivation 3 20 n coupling test torque 1.65 nm recommended torque 0.80 nm to 1.10 nm environmental data temperature range 40c to +85c thermal shock iec 611691, subclause 9.4.4 corrosion iec 611691, subclause 9.4.6 vibration iec 611691, subclause 9.3.3 shock iec 611691, subclause 9.3.14 moisture resistance iec 611691, subclause 9.4.3 2002/95/ec (rohs) compliant tooling n/a suitable cables ut 70ll packing standard 1 pce in bag weight 11.4 g/pce draft date approved date rev. engineering change n umber name date herbert babinger 20/10/06 armin maiw?lder 14/09/11 b00 11-0780 georg schiele 14/09/11 while the information has been carefully compiled t o the b est of our knowledge, nothing is intended as repres entation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|